2
AIR BLOWER
YORK Technical Guide Code 035T76009-000
1 - SAFETY
Installation and maintenance of this air conditioning
system should only be carried out by trained and
qualified personnel.
Regular maintenance operations such as cleaning the
coils and air filters must be performed to keep the units
in proper operating condition.
CAUTION
Before undertaking any work on the unit, make sure
that the power supply has been disconnected.
ELECTRICAL CONNECTIONS
All electrical wiring and connections must comply with
local standards. Power supply cord and interconnection
cord used must not be lighter than Polychloroprene
sheated cord (245 IEC 57 or H05RN-F).
Disconnecting device must have a contact separation
of at least 3 mm.
GENERAL PRECAUTIONS
Check that the power supply available agrees with
nameplate voltage.
Use adequate line protection.
The unit must be grounded.
LIST OF CONTENTS
1 - Safety .................................................. 2
2 - Indoor and Outdoor Units ................. 3
3 - Technical Specifications ................... 3
4 - Dimensions ......................................... 4
5 - Installation .......................................... 5
6 - Condensate Drainage ........................ 6
7 - Refrigerant Piping Connections ....... 7
8 - Fan Speeds ......................................... 8
9 - Unit Controller Operation ............ 9-11
10 - Wiring Diagram ................................ 12
11 - Service and Maintenance ................ 13
12 - Technical Appendix ......................... 14
Part List : (Contact YORK)
Decommissioning, Dismantling and Disposal
TECHNIC
AL GUID
E
TECHNICAL GUIDE
02_MAL-MAM.p65
20/4/02, 09:42
2
