036-21320-002 Rev. A (1103)
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
SPLIT-SYSTEM HEAT PUMPS
12 SEER
MODELS:
E*BC-F018 THRU 060
(1.5 THRU 5 TONS, 1 PH)
E*BC-(T,W)036 THRU 060
(3 THRU 5 TONS, 3 PH)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com for the most
up-to-date technical information.
Additional rating information can be found at
www.ariprimenet.org.
U
N
IT
AR
Y
HE
AT
P
U
M
P
T
E QUI P ME N
R
S E CT
I O
N S
A T I O N
E
RT
I F I
C
C
O
F
D
S T A N D A R
I
AR
2 4
0
M
A
N
U
F
A
C
TU
R
E
R
CE
RT
I F I
E D
C
LY
OM
P
I
NG
T O A R I AS
LISTED
This product was manufactured
in a plant whose quality system
is certified/registered as being
in conformity with ISO 9001.
Certification applies only
when the complete
system is listed
with ARI.
TECHNICAL
GUIDE
TECHNICAL
GUIDE
DESCRIPTION
The 12 SEER series heat pumps are designed for use with a
variety of UPG evaporator sections to suit any application
need. A full line of matching Add-On Coils are available for use
with upflow, downflow or horizontal furnaces. Matching Air
Handlers are also available for upflow, downflow or horizontal
installation to provide a complete system. Electric heat may be
installed in air handlers. All units are factory charged to assure
easy installation.
WARRANTY
Single Phase Units:
5-year limited parts warranty.
10-year limited compressor warranty.
Three Phase Units:
1-year limited parts warranty.
5-year limited compressor warranty.
FEATURES
•
DURABLE CONSTRUCTION -
The outdoor unit is con-
structed of pre-painted steel that offers tough protection
against corrosion and resists fading when exposed to sun-
light. Drain holes are incorporated into the base pan to per-
mit free drainage of moisture.
•
QUALITY COILS -
The coil is constructed of copper tube
and aluminum fins.
•
COIL PROTECTION -
Coils are protected from damage by
a polymer mesh applied between the coil face, and a PVC
coated steel coil guard.
•
PROTECTED COMPRESSOR -
The hermetic compressor
is internally protected against high pressure and tempera-
ture by the simultaneous operation of a high pressure relief
valve and temperature sensors which stop the compressor
if operating temperatures go too high. Both protectors reset
automatically. A discharge line solid core filter drier further
protects the compressor.
•
TIME TEMPERATURE DEFROST CONTROL
- Includes a
five-minute anti-short cycle timer to protect the compressor
from short cycling. Field selectable 30, 60, 90 minutes
defrost intervals.
•
LOW OPERATING SOUND LEVEL -
The compressor is
mounted on rubber isolators to reduce operating sounds.
The slow moving condenser fan keeps air turbulence and
sound to a low level.
•
EASY ACCESS -
Removable panel affords accessibility to
the electrical box.
•
FULLY CHARGED AND FACTORY WIRED -
to simplify
installation and reduce labor costs. Only power supply and
control wiring and refrigerant lines must be connected. All
models are sweat connect with reusable service valves.
•
Factory tested
- to verify system operation and control
functioning before shipment.
•
U.L. and C.U.L.
listed - approved for outdoor application.
Certified in accordance with the Unitary Small Equipment certi-
fication program, which is based on ARI Standard 210/240.
