036-21318-002 Rev. A (0106)
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
SPLIT-SYSTEM
HEAT PUMPS
10 SEER
MODELS:
E*BA-F018 THRU 060
(1.5 THRU 5 NOMINAL TONS, 1 PH)
E*BA-(T,W)036 THRU 090
(3 THRU 7.5 NOMINAL TONS, 3 PH)
MODELS: 018 - 060 (1 PH)
MODELS: 036-048 (3 PH)
MODELS: 060, 090 (3 PH)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com for the most
up-to-date technical information.
Additional rating information can be found at
www.ariprimenet.org.
TECHNICAL
GUIDE
TECHNICAL
GUIDE
U
N
IT
AR
Y
HE
AT
P
U
M
P
T
E QUI P ME N
R
S E CT
I O
N S
A T I O N
E
RT
I F I
C
C
O
F
D
S T A N D A R
I
AR
2 4
0
M
A
N
U
F
A
C
TU
R
E
R
CE
RT
I F I
E D
C
LY
OM
P
I
NG
T O A R I AS
LISTED
This product was manufactured
in a plant whose quality system
is certified/registered as being
in conformity with ISO 9001.
Certification applies only
when the complete
system is listed
with ARI.
DESCRIPTION
The 10 SEER Series heat pumps is the outdoor part of a ver-
satile system of heat pumps. It is designed to be custom-
matched with one of UPG’s complete line of evaporator sec-
tions, with each serving a specific function. Matching Air Han-
dlers are available for upflow, downflow, or horizontal
applications to provide a complete system. Electric Heaters
are available, if required. Add-On coils are available for use
with upflow, downflow, or horizontal furnaces and air han-
dlers.
WARRANTY
Single Phase Units:
5-year limited parts warranty.
5-year limited compressor warranty.
Three Phase Units:
1-year limited parts warranty.
5-year limited compressor warranty.
FEATURES
•
QUALITY COILS - The coil is constructed of copper tube and
aluminum fins.
•
COIL PROTECTION - Coils are protected from damage by a
polymer mesh applied between the coil face, and a PVC
coated steel coil guard.
•
PROTECTED COMPRESSOR - The compressor is internally
protected against high pressure and temperature. This is
accomplished by the simultaneous operation of high pressure
relief valve and a temperature sensor which protects the com-
pressor if undesirable operating conditions occur. A liquid line
filter-drier further protects the compressor.
•
DURABLE FINISH - Cabinet is made of pre-painted steel.
The pre-treated flat galvanized steel provides a better paint to
steel bond, which resists corrosion and rust creep. Special
primer formulas and matted-textured finish insure less fading
when exposed to sunlight.
•
LOWER INSTALLED COST - Installation time and costs are
reduced by easy power and control wiring connections. Dis-
charge line heat exchanger knockouts are provided, if
required. Available in sweat connect models only. The unit
contains enough refrigerant for matching indoor coils and 15
feet of interconnecting piping. The small base dimension
means less space is required on the ground or roof.
•
TOP DISCHARGE - The warm air from the top mounted fan is
blown up away from the structure and any landscaping. This
allows compact location on multi-unit applications.
•
LOW OPERATING SOUND LEVEL - The upward air flow car-
ries the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the rippled fins of the condenser
coil muffle the normal fan motor and compressor operating
sounds.
•
LOW MAINTENANCE - Long life permanently lubricated
motor-bearings need no annual servicing.
•
EASY SERVICE ACCESS - Fully exposed refrigerant con-
nections, a single panel covering the electrical controls, and
the molex plug in the control box connecting the condenser
fan make for easy servicing of the unit.
•
SECURED SERVICE VALVES - Secured re-usable service
valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.
•
U.L. and C.U.L. listed - approved for outdoor application.
Certified in accordance with the Unitary Small Equipment certifi-
cation program, which is based on ARI Standard 210/240.
