background image

INSTALLATION, OPERATION, & MAINTENANCE

FAN COIL

AIR CONDITIONERS

Supersedes: Form 115.20-NOM3 (105) Form 115.20-NOM3 (1006)

***** WARNING TO INSTALLER, SERVICE PERSONNEL AND OWNER *****

 

Altering the product or replacing parts with non authorized factory parts voids all warranty or 

implied warranty and may result in adverse operational performance and/or a possible hazardous 

safety condition to service personnel and occupants. Company employees and/or contractors are 

not authorized to waive this warning.

Notes:

 1.  2-Pipe units have one water coil.  4-Pipe units have two water coils.
 2.  Changeover is used to select heating or cooling mode.
 3.  YORK International does not recommend “fan cycle” applications for cooling on unit mounted thermostats.
 4.  For proper operation, control valve must be normally closed.
 5.  Aquastats provided where required.

MODEL YVC -Vertical Concealed Model

The 

YVC 

model fan 

coil is 

designed to be furred into the 

wall where the supply and return or both are connected 

to short runs of ductwork. These units are often used 

for perimeter heating and cooling 

of offices, 

corridors, 

hospitals, apartments, hotels, and other multi-room 

buildings.

MODEL YVS 

YVF -Vertical Cabinet Models YVS 

(Slant Top), YVF (Flat Top)

The 

YVS 

YVF 

model fan 

coils 

have the addition 

of 

an 

attractive, painted cabinet to blend with any decor. These 

units will have heavy-duty stamped face louvered grilles 

(Style A), plastic discharge grilles (Style A), or metal 

grilles (Style B). These units are typically installed in 

plain sight, under windows 

or 

against walls in schools, 

hospitals, office buildings, and other institutions.

MODEL YWC -Vertical Recessed Wall Model

The 

YWC 

model fan 

coil 

is designed to be recessed 

into the wall. These units are engineered to be quiet and 

designed 

to 

be easy to install and service. These units 

are ideal for perimeter heating and cooling in hotels, 

apartments, hospitals, public 

office 

buildings, 

offices, 

corridors, and other multi-room buildings. This unit 

comes standard with 

decorative wall panel for front 

supply and return air.

00563VIPa

00803VIPa

YVC

YVF/YVS

YWC

00771VIPa

L23953Y 1006

Summary of Contents for 10YWC













Reviews: