www.yoozgroup.com
www.yoozgroup.com
Installing / Removing the SIM Card
Installing the SIM Card
•Switch off your Phonepad before installing or replacing the SIM Card.
•Lift the hinge door located on the Phonepad upfront to remove the cover and
insert your SIM card(s) in the SIM slot.
Removing the SIM Card
•Make sure that your Phonepad is off.
•Slide the SIM card out.
Installing the battery
•Only use battery, chargers and accessories specially designed for your
Phonepad.
•Put the battery into its slot by aligning the Phonepad and battery contacts,
then press lightly on the battery to fit it into place.
Charging the battery
When you first get your Phonepad you’ll need to charge the battery.
•Connect the adapter. Ensure that the adapter is inserted with the correct
orientation. Do not force the connector into the mini – USB port.
•Connect the charger to a standard AC wall outlet.
•Disconnect the charger when the battery is fully charged.
Installing / removing the SD Card
•Lift the hinge door located on the upfront side of the Phonepad to remove the
cover and insert your SD card in the slot.
Basic Functions
Switching On / Off the Smartphone
Make sure the SIM card is in your device and the battery is charged.
•Hold
Power Key
to switch on your Phonepad.
•To switch it off, hold
Power Key
to get the Phonepad options. Select
Power off,
and then tap
OK.
Lock / Unlock the Phonepad
Lock
•Press
Power Key
to Lock the phone.
Unlock
•Press Power Key to activate your screen display.
•Tap the icon, drag to the right.
NOTE:
If you have set an unlock pattern, PIN or password for your phone, you’ll
need to draw the pattern or enter the PIN/password to unlock your screen.
Status and Notification Icons
Screen Touch Control
You can use finger gestures to control your Phonepad. The controls on your
touch-screen change dynamically depending on the tasks you’re performing.
•Tap the buttons, icons, or applications to select items or to open applications.
•Flick the screen to scroll up, down, left or right.
•Point, drag and drop to move particular items across the screen.
•Double-tap the screen to zoom in/out an image.
NOTE:
You can view the Phonepad screen in portrait or landscape orientation
simply by holding it upright or turning it on its side. Not all screens are viewable in
landscape.
USB connected
Airplane mode
Battery charge
Meeting mode
Alarm set
Silent mode
Bluetooth icon
Data Conn off
Missed call
Signal strength
New message
Wi-Fi network
Earphone insert
Signal searching
USB debugging connected
New Wi-Fi network detected