1. Control:
can control single motor, or a group
of up to 20 motors on each channel
2. Range:
200 meters outdoor,
35 meters indoor
3. Battery:
2 x CR2430
4. Power supply:
3 V
5. Dimensions:
110 x 48 x 12 mm
6. Transmitting power:
10 mW
7. Operating temperature:
from 0°C to 50°C
8. Protection degree:
IP 30
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.
1. Estimated battery lifespan is 3 year if the device runs 4 commends a day in average.
2. Batteries should be changed when LED diode stops flashing or receiving device stops reacting to commands.
3. To replace the batteries and get access the programming buttons, remove the back of the case.
4. When replacing the battery, pay attention to the correct polarity
Batteries contain substances that may be hazardous to health and may pollute the environment. Used batteries should
be disposed of properly.
In order to fully explore available functions of SVERO series please take a moment and read this manual before using the device.
SVERO transmitters are compatible with all YOODA brand devices.
SVERO_1x2R | SVERO_15x2R
www.sukcesgroup.pl
2. Detailed description
30-channel SVERO remomte control (SVERO_15x2R)
2-channel transmitter
(front)
30-channel transmitter
(front)
2-channel or 30-channel transmitter
(back)
UP button
STOP button
DOWN button
UP button
SUBCHANNEL 1:
SUBCHANNEL 2:
STOP button
DOWN button
UP button
STOP button
DOWN button
UP button
SUBCHANNEL 1:
SUBCHANNEL 2:
STOP button
DOWN button
CHANNEL - button
batteries
P2 programming button
for subchannel 2
P2 programming button
for subchannel 1
C button
1. General information
1