LED Watch - Instruction Manual
BK498
A. PRODUCT DESCRIPTION
Time indicated on the dial: 22 :54
Key A
：
Time and date display
Key B: Set function
B. FEATURES:
1. Display month, day, hour, minute and seconds;
2. 12H/24H hour format;
3. AM/PM;
4. 3 seconds stop state: when you press the button (A or B), the led light will last 3 seconds.
C. BATTERY
Battery required: 1 CR2032 Lithium cell battery.
When the display LED lights dimmed, the battery has to be replaced. In order to replace the batteries, please take your
watch to the nearest watch repair shop or watchmaker.
D. READING TIME
Press A button to show the current time.
Press A button once more to show month and date, and then press again to show
seconds.
Note: If the display is in 12-hour format, the hours corresponding to the
afternoon will be preceded by an apostrophe located in left position. This
sign enables to distinguish the hours in the afternoon from the hours
corresponding to the morning (See figure in the opposite).
E. TIME SETTING
Press A button to display the current time, then click the B button until the hours will be flashing. Press A button to set
the hours till you get the correct hour. Renew the same procedure to adjust the minutes month, day, year and 12/24h
format to the desired value: press B button, and the minutes, month, day, year and 12/24h format (it depends on what
you want to adjust) will be flashing, and then press A to get the desired value for minutes month, day, year and 12/24h
format.
Note: In order to remove the links in the watch band, please take your watch to the nearest watch repair
shop or watchmaker.
WARNING: You should not dispose of this device with your household waste. A selective collection system for
this type of product is implemented by your local authorities. Please contact your local authorities to find out
how and where collection takes place. These restrictions apply because electrical and electronic devices
contain dangerous substances that have harmful effects on the environment or on human health and must be
recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The symbol shows a waste container
crossed out with an X symbol.
Imported by PRODIS S.A.S, 1 Rue de Rome F-93110 Rosny-sous-Bois / Made in P.R.C.
Marketed by EUROtops Versand GmbH D-40764 LANGENFELD
