Yongnuo YN200, User Manual, Page: 10 / 28

M: manual flash mode - flash output
r a n g e 1 / 6 4 ~ 1 / 1 , w i t h 1 / 3 g e a r a s
adjustment increment.
In radio mode, long press the [ ] button to
set the flash mode to M, and press [
+ ] and [ -
] button to set the flash output.
Multi: Strobe flash mode - flash output
range 1/64~1/4
In radio mode, long press [ ] button to set
the flash mode to Multi, press [
+ ] and [ - ]
button to set the flash output. Short press
the [SET/FN] button to set the flash times
and the flash frequency successively.
TTL mode
In TTL mode, the metering system of the
c a m e r a w i l l d e te c t t h e f l a s h l i g h t i n g
reflected from the subject, and the flash
output is adjusted automatically, equalizing
exposure of the subject and background.
Press the[
+ ] [ - ] button to set exposure
compensation. The exposure compensation
v a l u e s e t b y t h e s l a v e u n i t w i l l b e
s u p e r i m p o s e d o n t h e e x p o s u r e
compensation set by the master unit.
Wireless Flash Shooting: Radio Transmission
-8-
6 . Flash mode setting*
In radio mode, long press the [ ] button to
switch between T TL/M/MULTI different
flash modes.
* For or
using RF603 / RF605 as the master unit .
synchronous interface triggering