14
Speed limit setting
The default value of the maximum riding speed of the display is 25Km / h. Changing this value
can set the maximum riding speed of the electric bike. When the electric power exceeds the set
value, the controller will stop the power supply to the motor to protect the rider's driving safety;
LS stands for speed limit. The selectable range of the maximum speed setting value is between
12Km / h and 40Km / h, which can be adjusted by the
UP / DOWN
button. Press and hold the
‘i’
button to confirm and exit the setting state.
Speed limit setting interface
Personalization settings
In order to meet the customer's personalized usage requirements, personalized settings are set,
which include the display's battery power settings, boost parameter settings, current limit value
settings, boost sensor settings, speed sensor settings, handlebar function settings, system settings
and Power-on password settings, a total of eight settings. At the same time, press and hold the
UP
and DOWN
buttons for more than 2 seconds to enter the normal setting state; Then press and
hold the
UP and DOWN
buttons for more than 2 seconds at the same time again to enter the
display personalization item selection interface;
Select the content to be set by
UP / DOWN
, and press
‘i’ key
enters the corresponding setting
interface.
Ensure you do not change Personalization settings. Changing Personalization settings
may cause your bike to stop working properly. If you need the default settings for the
advanced settings menu, please contact Eahora.
