YOKOGAWA YS1000 Series, User Manual

Page: 37 / 60

3-6
IM 01B08D02-02EN
3.4 Making Zero and Span Adjustments of Input
Description
Zero and span adjustments of inputs can be set as for mV input, thermocouple, and RTD
cards.
Setting Details
Operation Display > + keys (to the Tuning Menu Display) > + keys (to
the Engineering Menu Display) > [ SC MAINT ] software key (Input Specification Setting
Display)
Engineering Display Setting Procedure
(1) Press the [→] software key to display [SET INHB]
in highlight.
(2) Press the [ ] software key to display [SET ENBL].
(3) Press the [MNU] software key to display
01
MODEL
Directly input the card model (e.g., ER5*C)
(4) Press the [MNU] key several times to display
C00
ADJUST
(5) Press the [PRM] software key several times to
display the left display.
(6) Press the [ ] or [ ] software keys to change the
data display section.
(7) Press the [ENT] software key to display the data
display section in highlight.
(8) Press the [ENT] software key again to accept the
setting.
Setting completed.
0504E.ai
Software key
function display
Parameter
number
Parameter
name
Data display
Communication
status display
Menu change key
Parameter change key
Cursor movement key
Data increase key
Data decease key
ENTER key