background image

User’s

Manual

YFGW710

Field Wireless Integrated Gateway

Read Me First

IM 01W01F01-11EN

IM 01W01F01-11EN

7th Edition

This document specifies the important information to use this product correctly and 

safely and the Use Consent Contract of Attached Software for Field Wireless Integrated 

Gateway.
Before use the product, be sure to read this document first.

Contents

Introduction ...................................................................................................2
Safety Precautions .......................................................................................4
Explosion Protected Type Specifications .............................................. 10
How to Use Online Manual ....................................................................... 23
Preparation to Install YFGW710 Attached Software .............................. 23
Copyright and Trademark Notices .......................................................... 24
About User’s Manual ................................................................................. 25
Information of User’s Manual Revision .................................................. 25
YFGW710 Software License Agreement ................................................. 26

Summary of Contents for YFGW710






























Reviews: