manualshive.com logo in svg

YOKOGAWA XL100, User Manual

Share
Download
YOKOGAWA XL100 User Manual Download Page 117

7-4

IM XL100C-E

E-mail and Web Server Errors

Code

Message

Description/Corrective Action

260

IP address is not set or ethernet function is not available.

An IP address has not been assigned to the XL100.
Check the IP address.

261

SMTP server is not found.

Occurs when the SMTP server is specified by name.
• Check the DNS setting.
• Check the SMTP server name.

262

Cannot initiate E-mail transmission.

• The host name of the XL100 is not correct. Check

the host name.

• The port number setting of the SMTP server is not correct.

Check the port number.

263

Sender’s address rejected by the server.

Check the sender’s address.

264

Some recipients’ addresses are invalid.

Check the recipient’s address.

265

SMTP protocol error.

May occur if a network failure (cable problems, duplicate
addresses, network device failure, and so on) occurs in the
middle of the e-mail transmission.

266

Ethernet cable is not connected.

Check the cable connection.

267

Could not connect to SMTP server.

• Check to see that the SMTP server is connected

to the network.

• If the SMTP server name is specified using an IP

address, check to see that the IP address is correct.

268

E-mail transmission request failed.

Contact the vendor from which you purchased the product.

269

E-mail transfer error.

May occur if a network failure (cable problems, duplicate
addresses, network device failure, and so on) occurs in the
middle of the e-mail transmission.

275

The current image cannot be output to the Web.

The setup display cannot be output to the Web browser.
This message is displayed on the Web browser.

276

Image data currently being created.  Unable to perform

Try again a little later.

key operation.

This message is displayed on the Web browser.

277

Could not output screen to Web.

This message is displayed on the Web browser.

7.2  Error Messages Related to Operation

Summary of Contents for XL100







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands