manualshive.com logo in svg

YOKOGAWA WT5000, User Manual

Share
Download
YOKOGAWA WT5000 User Manual Download Page 85

3-7

IM WT5000-02EN

Resetting the Displayed Items

You can clear the displayed items (no data “----”) or return them to the preset displayed items.

 

Closes the menu

Set the reset pattern (Element Origin, Function Origin, 

Clear Current Page, Clear All Pages).

Executes reset

Reset Patterns

Element Origin pattern (1 element on 1 page)

Function Origin pattern (1 function on 1 page)

The screen is a display example of element 1.

The screen is a display example of voltage.

Configuring the Columns to Display

You can configure this on the Matrix display.

 

Select the displayed item number (displayed column).

The number increases from left to right on the matrix display.

Example: If you select 3, the third column from the left is displayed.

Closes the menu

Resets displayed items

Selects the input element (Element1 to Element7) or 

wiring unit (ΣA, ΣB, ΣC) to be configured

Set the number of columns (4, 7).

3.1  Setting the Display Format

Summary of Contents for WT5000










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands