manualshive.com logo in svg

YOKOGAWA WT5000, User Manual

Share
Download
YOKOGAWA WT5000 User Manual Download Page 208

15-6

IM WT5000-02EN

15.4  Web Server Feature

► “Web Server (FTP/Web Server)” in the features guide

This section explains operating procedures using the following setup methods.
•  Procedure Using the Setup Menu (see chapter 1)
•  Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)

Procedure Using the Setup Menu

1.

  Tap the 

Setup

 icon 

, or press 

MENU

 under SETUP.

2.

  Tap the 

Utility

 tab. The utility settings overview screen appears.

Pressing 

ESC

 closes the overview screen.

3.

 Tap 

Network

. An Ethernet setup screen (TCP/IP, FTP/Web Server, Net Drive, SNTP) appears.

Configuring the Web Server (Web Server)

4.

 Tap 

FTP/Web Server

. An FTP/Web Server screen appears.

Time Out is a setting used by the FTP server feature. You do not have to set it for the Web server feature.

 

  

Utility tab

Configure the Ethernet.

Configure the FTP server.

Set the user name (up to 32 characters).

Set the password (up to 32 characters).

Applies the settings

Note

You can also display the utility settings overview screen by moving the cursor on the Utility tab using the 
arrow keys and then pressing SET.

Procedure Using Keys

See section 15.2.

Summary of Contents for WT5000










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands