manualshive.com logo in svg

YOKOGAWA WT5000, User Manual

Share
Download
YOKOGAWA WT5000 User Manual Download Page 207

15-5

IM WT5000-02EN

15.3  Accessing the Instrument from a PC (FTP 

Server)

► “FTP Server (FTP/Web Server)” in the features guide

This section explains operating procedures using the following setup methods.
•  Procedure Using the Setup Menu (see chapter 1)
•  Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)

Procedure Using the Setup Menu

1.

  Tap the 

Setup

 icon 

, or press 

MENU

 under SETUP.

2.

  Tap the 

Utility

 tab. The utility settings overview screen appears.

Pressing 

ESC

 closes the overview screen.

3.

 Tap 

Network

. An Ethernet setup screen (TCP/IP, FTP/Web Server, Net Drive, SNTP) appears.

Configuring the FTP Server (FTP Server)

4.

 Tap 

FTP/Web Server

. An FTP/Web Server screen appears.

 

  

Utility tab

Configure the Ethernet.

Configure the FTP server.

Set the user name (up to 32 characters).

Set the password (up to 32 characters).

Applies the settings

Set the timeout (30s to 3600s).

Note

•  If you set the user name to “anonymous,” you can connect to the instrument without entering a password.
•  You can also display the utility settings overview screen by moving the cursor on the Utility tab using the 

arrow keys and then pressing SET.

FTP Client Software

Start an FTP client on a PC.
Enter the user name and password that you entered on the screen shown above to connect to the 
instrument.

Procedure Using Keys

See section 15.2.

Summary of Contents for WT5000










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands