manualshive.com logo in svg

YOKOGAWA WT5000, User Manual

Share
Download
YOKOGAWA WT5000 User Manual Download Page 146

7-8

IM WT5000-02EN

7.3  Setting the Data Storage Destination

► “File Save Conditions” in the features guide

This section explains operating procedures using the following setup methods.
•  Procedure Using the Setup Menu (see chapter 1)
•  Procedure Using the Menu Icons (see page iii)
•  Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)

Procedure Using the Setup Menu

1.

  Tap the 

Setup

 icon 

, or press 

MENU

 under SETUP.

2.

 Tap 

Computation/Output

 tab. A computation and output settings overview screen appears.

Pressing 

ESC

 closes the overview screen.

Configuring the Storage (Store)

3.

 Tap 

Store

.

 

A storage setup screen appears.

 

  

Set the file name.

(See section 8.2.)

Set comments. 

(see section 8.2)

Computation/Output tab

Configure the storage.

Select whether to perform automatic CSV 

conversion when storage ends.

Set auto naming (see section 8.2).

Set the save destination 

(see section 8.2).

Note

You can also display the computation/output settings overview screen by moving the cursor on the 
Computation/Output tab using the arrow keys and then pressing SET.

Summary of Contents for WT5000










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands