manualshive.com logo in svg

YOKOGAWA WT5000, User Manual

Share
Download
YOKOGAWA WT5000 User Manual Download Page 113

4-5

IM WT5000-02EN

Setting the Current Mode for Current Integration (q Mode)

4.

 Tap 

q Mode.

 The following screen appears.

 

  

Select the current mode setup method (Each, All).

When you select Each, you can set the current mode for each input element.

Set the current mode.

(rms, mean, dc, r-mean, ac)

Procedure Using the Menu Icons

You can also use the menu icons shown on the right side of the screen to set the integration 
conditions.

1.

  Tap the 

Integration

 menu icon 

. An Integration menu appears in the sub menu area on the 

right side of the screen.

By tapping the displayed items, you can specify the same settings as when using the screen explained 
earlier.

Note

For details on the Integration menu, see page xii.

Procedure Using Keys

You can also use the front panel keys to set integration.

 

Set the integration conditions.

The Setup menu appears.

4.1  Setting Integration Conditions

Summary of Contents for WT5000










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands