YOKOGAWA WT5000 User Manual Download Page 10

Page: 10 / 233

IM WT5000-02EN

Update Rate/Averaging Icon

Use this icon to set the data update interval and averaging.

Update Rate/Averaging Menu

Closes the menu

Set the measurement method (for the parameters, see section 2.10).

Set the data update interval (for the parameters, see section 2.10).

Set the response (for the parameters, see section 2.10).

You can use this when the computing method is set to digital filter

average.

Update Rate menu

Averaging menu

Advanced data update interval and averaging settings

For details on the data update interval, see section 2.10.

For details on averaging, see section 2.13.

Turns averaging on and off

Set the averaging type (for the parameters, see section 2.13).

Set the attenuation constant or average count

(for the parameters, see section 2.13).

Menu Icons

Summary of Contents for WT5000










































































































































































































































Search results

Summary of Contents for WT5000

Reviews:

Related manuals for WT5000

Brands by name

Popular brands

YOKOGAWA WT5000, User Manual

Search results

Summary of Contents for WT5000

Reviews:

Related manuals for WT5000

Brands by name

Popular brands