YOKOGAWA WT500 User Manual Download Page 209

Page: 209 / 360

7-17

IM 760201-01E

aveform Display

App

Index

7.9 Measuring with Cursors

Procedure

Press

SHIFT+FORM (CURSOR)

to display the Cursor menu.

Selecting Whether or Not to Use Cursor Measurement

Use the

cursor keys

to select Wave Cursor.

Press

SET

to select ON or OFF.

If you select ON, the results of cursor measurement are displayed.

Selecting the Waveforms to Measure Using Cursors

• Selecting the Waveform to Measure Using

Use the

cursor keys

to select C1+ under Trace.

Press

SET

to display the waveform selection box.

Use the

cursor keys

to select a waveform from the list (which starts with U1).

Press

SET

to confirm the waveform selection.

• Selecting the Waveform to Measure Using Cursor x

Use the

cursor keys

to select C2x under Trace.

Press

SET

to display the waveform selection box.

Use the

cursor keys

to select a waveform from the list (which starts with U1).

Press

SET

to confirm the waveform selection.

Summary of Contents for WT500









































































































































































































































































































































































Search results

Summary of Contents for WT500

Reviews:

Brands by name

Popular brands

YOKOGAWA WT500, User Manual

Search results

Summary of Contents for WT500

Reviews:

Brands by name

Popular brands