manualshive.com logo in svg

YOKOGAWA WT500, User Manual

Share
Download
YOKOGAWA WT500 User Manual Download Page 103

4-7

IM 760201-01E

Measurement Conditions

3

2

1

4

5

6

7

8

9

10

11 

12

13

14

App

Index

4.4  Setting the Measurement Ranges for Direct 

Input

Procedure

Selecting Which Element to Set

1.

  Press 

ELEMENT

 to select the element that you want to set. The indicator for the 

selected element (located above the ELEMENT key) lights. To select all elements, 
press 

SHIFT+ELEMENT (ALL)

.

Setting the Voltage Range

2.

  Press the 

VOLTAGE keys (  and  )

 to set the voltage range. The range specified 

for each element is displayed at the upper right of the screen.

•  Press the voltage range up key to increase the voltage range.
•  Press the voltage range down key to decrease the voltage range.
•  Press SHIFT+  (AUTO) to set the range automatically. The AUTO LED lights.

Setting the Current Range

3.

  Press the 

CURRENT keys (  and  )

 to set the current range. The range specified 

for each element is displayed at the upper right of the screen.

•  Press the current range up key to increase the current range.
•  Press the current range down key to decrease the current range.
•  Press SHIFT+  (AUTO) to set the range automatically. The AUTO LED lights.

4.

  Repeat steps 1 to 3 to enter the measurement ranges for all of the elements.

Note

When the current range is set for an external current sensor (optional), before you set the input 
range, refer to section 4.5, “Setting the Measurement Ranges for an External Current Sensor 
(Optional),” to switch to direct input.

Summary of Contents for WT500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands