6-28
IM WT3001E-17EN
:CURSor:WAVE?
Function
Queries all settings related to the cursor
measurement on the waveform display.
Syntax
:CURSor:WAVE?
Example
:CURSOR:WAVE? -> :CURSOR:WAVE:
STATE 1;TRACE1 U1;TRACE2 I1;
PATH MAX;POSITION1 10.0E-03;
POSITION2 40.0E-03
:CURSor:WAVE:PATH
Function
Sets the cursor path on the waveform display or
queries the current setting.
Syntax
:CURSor:WAVE:PATH {MAX|MIN|MID}
:CURSor:WAVE:PATH?
Example
:CURSOR:WAVE:PATH MAX
:CURSOR:WAVE:PATH? ->
:CURSOR:WAVE:PATH MAX
:CURSor:WAVE:POSition<x>
Function
Sets the cursor position on the waveform display
or queries the current setting.
Syntax
:CURSor:WAVE:POSition<x> {<Time>}
:CURSor:WAVE:POSition<x>?
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<Time> = 0 to 20.00 s
Example
:CURSOR:WAVE:POSITION1 10MS
:CURSOR:WAVE:POSITION1? ->
:CURSOR:WAVE:POSITION1 10.0E-03
Description The selectable range and resolution of <Time> is
determined by the Time/div value of the waveform
(
:DISPlay:WAVE:TDIV
).
:CURSor:WAVE[:STATe]
Function
Turns ON/OFF the cursor display on the
waveform display or queries the current setting.
Syntax
:CURSor:WAVE[:STATe] {<Boolean>}
:CURSor:WAVE:STATe?
Example
:CURSOR:WAVE:STATE ON
:CURSOR:WAVE:STATE? ->
:CURSOR:WAVE:STATE 1
:CURSor:WAVE:TRACe<x>
Function
Sets the cursor target on the waveform display or
queries the current setting.
Syntax
:CURSor:WAVE:TRACe<x> {U<x>|I<x>|
SPEed|TORQue|MATH<x>}
:CURSor:WAVE:TRACe<x>?
<x> of TRACe<x> = 1 or 2 (1 = C1 +, 2 = C2 x)
<x> of U<x>, I<x> = 1 to 4
<x> of MATH<x> = 1 to 2 (MATH)
Example
:CURSOR:WAVE:TRACE1 U1
:CURSOR:WAVE:TRACE1? ->
:CURSOR:WAVE:TRACE1 U1
Description •
{SPEed|TORQue}
are valid only on models
with the motor evaluation function (/MTR
option).
• MATH<x> is valid only on models with the
advanced computation function (/G6 option).
:CURSor:WAVE:{X<x>|DX|PERDt|Y<x>|
DY}?
Function
Queries the cursor measurement value on the
waveform display.
Syntax
:CURSor:WAVE:{X<x>|DX|PERDt|Y<x>|
DY}?
X<x> = X-axis value of the cursor position (X1 =
X+, X2 = Xx)
DX = X-axis value between cursors (
∆
X)
PERDt = 1/DT (1/
∆
X) value between cursors
Y<x> = Y-axis value of the cursor position (Y1 =
Y+, Y2 = Yx)
DY = Y-axis value between cursors (
∆
Y)
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
Example
:CURSOR:WAVE:Y1? -> 78.628E+00
Description If the cursor display is not turned ON in the
waveform display, “NAN (Not A Number)” is
returned.
6.6 CURSor Group