YOKOGAWA WT3001E, User Manual, Page: 70 / 179

6-26
IM WT3001E-17EN
6.6 CURSor Group
The commands in this group deal with cursor measurements. You can make the same settings and inquiries as when
CURSOR (SHIFT+MEASURE) on the front panel is used.
:CURSor?
Function Queries all settings related to the cursor
measurement.
Syntax
:CURSor?
Example
:CURSOR? -> :CURSOR:WAVE:STATE 0;
TRACE1 U1;TRACE2 I1;PATH MAX;
POSITION1 10.0E-03;
POSITION2 40.0E-03;:CURSOR:BAR:
STATE 0;POSITION1 1;POSITION2 15;:
CURSOR:TREND:STATE 0;TRACE1 1;
TRACE2 2;POSITION1 100;
POSITION2 900
:CURSor:BAR?
Function Queries all settings related to the cursor
measurement of the bar graph display.
Syntax
:CURSor:BAR?
Example
:CURSOR:BAR? -> :CURSOR:BAR:
STATE 1;POSITION1 1;POSITION2 15
Description This command is valid only on models with the
advanced computation function (/G6 option).
:CURSor:BAR:POSition<x>
Function Sets the cursor position (order) on the bar graph
display or queries the current setting.
Syntax
:CURSor:BAR:POSition<x> {<NRf>}
:CURSor:BAR:POSition<x>?
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<NRf> = 0 to 100
Example
:CURSOR:BAR:POSITION1 1
:CURSOR:BAR:POSITION1? ->
:CURSOR:BAR:POSITION1 1
Description This command is valid only on models with the
advanced computation function (/G6 option).
:CURSor:BAR[:STATe]
Function Turns ON/OFF the cursor display on the bar
graph display or queries the current setting.
Syntax
:CURSor:BAR[:STATe] {<Boolean>}
:CURSor:BAR:STATe?
Example
:CURSOR:BAR:STATE ON
:CURSOR:BAR:STATE? ->
:CURSOR:BAR:STATE 1
Description This command is valid only on models with the
advanced computation function (/G6 option).
:CURSor:BAR:{Y<x>|DY}?
Function Queries the cursor measurement value on the
bar graph display.
Syntax
:CURSor:BAR:{Y<x>|DY}?
Y<x> = Y-axis value at the cursor position (Y1 =
Y1+, Y2+, Y3+ Y2 = Y1x, Y2x, Y3x)
DY = Y-axis value between cursors ( ∆ Y1, ∆ Y2,
and ∆ Y3)
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
Example
:CURSOR:BAR:Y1? -> 78.628E+00
Description • This command is valid only on models with the
advanced computation function (/G6 option).
• When multiple bar graphs are displayed, the
cursor measurement values of each bar graph
are returned in order.
• If the cursor display is not turned ON on the
bar graph, “NAN (Not A Number)” is returned.
:CURSor:FFT?
Function Queries all settings related to the cursor
measurement on the FFT waveform display.
Syntax
:CURSor:FFT?
Example
:CURSOR:FFT? -> :CURSOR:FFT:
STATE 0;TRACE1 FFT1;TRACE2 FFT2;
POSITION1 100;POSITION2 900
Description This command is valid only on models with the
advanced computation function (/G6 option).
:CURSor:FFT:POSition<x>
Function Sets the cursor position on the FFT waveform
display or queries the current setting.
Syntax
:CURSor:FFT:POSition<x> {<NRf>}
:CURSor:FFT:POSition<x>?
<x> = 1, 2(1 = C1 +, 2 = C2 x)
<NRf> = 0 to 1001
Example
:CURSOR:FFT:POSITION1 20
:CURSOR:FFT:POSITION1? ->
:CURSOR:FFT:POSITION1 20
Description This command is valid only on models with the
advanced computation function (/G6 option).