6-23
IM WT3001E-17EN
1
2
3
4
5
6
7
App
Index
Communication Commands
:CBCycle:SYNChronize:SOURce
Function
Sets the synchronization source for Cycle by
Cycle measurement or queries the current
setting.
Syntax
:CBCycle:SYNChronize:SOURce {U<x>|
I<x>|EXTernal}
:CBCycle:SYNChronize:SOURce?
<x> = 1 to 4 (element)
EXTernal = External clock input (Ext Clk)
Example
:CBCYCLE:SYNCHRONIZE:SOURCE U1
:CBCYCLE:SYNCHRONIZE:SOURCE? ->
:CBCYCLE:SYNCHRONIZE:SOURCE U1
:CBCycle:TIMEout
Function
Sets the timeout value for Cycle by Cycle
measurement or queries the current setting.
Syntax
:CBCycle:TIMEout {<NRf>}
:CBCycle:TIMEout?
<NRf> = 0 to 3600 (seconds)
(0 = No timeout)
Example
:CBCYCLE:TIMEOUT 10
:CBCYCLE:TIMEOUT? ->
:CBCYCLE:TIMEOUT 10
:CBCycle:TRIGger?
Function
Queries all settings related to triggers or queries
the current setting.
Syntax
:CBCycle:TRIGger?
Example
:CBCYCLE:TRIGGER? ->
:CBCYCLE:TRIGGER:MODE AUTO;
SOURCE U1;SLOPE RISE;LEVEL 0.0
Description This is the same query as with the
“
:DISPlay:WAVE:TRIGger?
” command.
:CBCycle:TRIGger:LEVel
Function
Sets the trigger level or queries the current
setting.
Syntax
:CBCycle:TRIGger:LEVel {<NRf>}
:CBCycle:TRIGger:LEVel?
<NRf> =
-
100.0 to 100.0(%)
Example
:CBCYCLE:TRIGGER:LEVEL 0
:CBCYCLE:TRIGGER:LEVEL? ->
:CBCYCLE:TRIGGER:LEVEL 0.0
Description This is the same setting or query as with
the “
:DISPlay:WAVE:TRIGger:LEVel?
”
command.
:CBCycle:TRIGger:MODE
Function
Sets the trigger mode or queries the current
setting.
Syntax
:CBCycle:TRIGger:MODE {AUTO|NORMal}
:CBCycle:TRIGger:MODE?
Example
:CBCYCLE:TRIGGER:MODE AUTO
:CBCYCLE:TRIGGER:MODE? ->
:CBCYCLE:TRIGGER:MODE AUTO
Description This is the same setting or query as with the
“
:DISPlay:WAVE:TRIGger:MODE
” command.
:CBCycle:TRIGger:SLOPe
Function
Sets the trigger slope or queries the current
setting.
Syntax
:CBCycle:TRIGger:SLOPe {RISE|FALL|
BOTH}
:CBCycle:TRIGger:SLOPe?
Example
:CBCYCLE:TRIGGER:SLOPE RISE
:CBCYCLE:TRIGGER:SLOPE? ->
:CBCYCLE:TRIGGER:SLOPE RISE
Description This is the same setting or query as with the
“
:DISPlay:WAVE:TRIGger:SLOPe
” command.
:CBCycle:TRIGger:SOURce
Function
Sets the trigger source or queries the current
setting.
Syntax
:CBCycle:TRIGger:SOURce {U<x>|I<x>|
EXTernal}
:CBCycle:TRIGger:SOURce?
<x> = 1 to 4 (element)
EXTernal = External trigger input (Ext Clk)
Example
:CBCYCLE:TRIGGER:SOURCE U1
:CBCYCLE:TRIGGER:SOURCE? ->
:CBCYCLE:TRIGGER:SOURCE U1
Description This is the same setting or query as with
the “
:DISPlay:WAVE:TRIGger:SOURce
”
command.
6.4 CBCycle Group