manualshive.com logo in svg

YOKOGAWA WT3001E, User Manual, Page: 17 / 179

Share
Download
YOKOGAWA WT3001E User Manual Download Page 17

1 

2 

3 

4 

5 

6 

7 

App

Index

2-3

IM WT3001E-17EN

RS-232 Interface (Option)

2.3  Combination of Handshaking Methods

When using the RS-232 interface for transferring data, it is necessary for equipment on 
both sides to agree on a set of rules to ensure the proper transfer of data. The set of 
rules is called handshaking. Because there are various handshaking methods that can 
be used between this instrument and the PC, one must make sure that the same method 
is chosen by both this instrument and the PC.
You can choose any of the four methods in the table below.

Handshake format Descriptions→

Data Sending Control (control 

method when sending data to a computer)

Data Receiving Control (control 

method when receiving data from a computer)

Software

Handshake

Software

Handshake

NO-NO
XON-XON
XON-RTS
CTS-RTS

Handshake

Method

No

handshake

No

handshake

Hardware

Handshake

Hardware

Handshake

OFF-OFF
XON-XON
XON-RS
CS-RS

The menu of 

this instrument

Sending stops 

when X-off is 

received, and 

sending is 

resumed when 

X-on is 

received.

Sending stops 

when CB(CTS) 

is False, and 

sending is 

resumed when 

CB is True.

X-off is sent when 

received data buffer 

becomes 3/4-full, 

and X-on is sent 

when the received 

data buffer is only 

1/4-full.

CA (RTS) is set to 

False when 

received data buffer 

is only 3/4-full, and 

is set to True when 

received data buffer 

is only 1/4-full.

OFF-OFF

Data Transmission Control

There is no handshaking between this instrument and the PC. The “X-OFF” and “X-ON” 
signals are treated as data, and the CS signal is ignored.

Data Reception Control

There is no handshaking between this instrument and the PC. When the received buffer 

becomes full, all overflow data are discarded.
RS = True (fixed).

XON-XON

Data Transmission Control

Software handshaking is performed between this instrument and the PC. When an 
“X-OFF” code is received while sending data to the PC, this instrument stops the data 
transmission. When this instrument receives the next “X-ON” code, this instrument 
resumes the data transmission. The CS signal received from the PC is ignored.

Data Reception Control

Software handshaking is performed between this instrument and the PC. When the free 
area of the receive buffer decreases to 64 bytes, this instrument sends an “X-OFF” code. 
When the free area increases to 192 bytes, it sends an “X-ON” code.

RS = True (fixed).

Summary of Contents for WT3001E




















































































































































































Reviews:

No comments