YOKOGAWA wt3000 User Manual Download Page 57

Page: 57 / 384

2-31

IM 760301-01E

App

Index

Faunctional Description

2.8

Trend, Bar Graph, and Vector Displays

Trends of each measurement function, bar graphs of harmonics of each order, and

vectors of the fundamental signal of each element (when using the harmonic

measurement option) can be displayed.

Trend display

The trends of all measurement functions that are measured during normal measurement

and harmonic measurement are displayed.

Trend of voltage U1

Trend of the

frequency of

voltage U1

• Trend Display Data

When the retrieval of waveform display data is OFF during normal measurement, the

numeric data of measurement functions that are determined for each data update rate

is P-P compressed

for each display segment (raster) and made into trend display

data.

When the retrieval of waveform display data is ON during normal measurement, the

numeric data of measurement functions that are determined each time a trigger

occurs is P-P compressed

for each display segment (raster) and made into trend

display data.

In some cases, P-P compression is not performed.

• Horizontal (Time) Axis «For procedures, see section 7.4.»

The time per division can be set in the range of 3 s to 1 day.

• Setting the Scale «For procedures, see section 7.5.»

Auto scaling is provided in which the upper and lower limits of the screen are

determined automatically from the maximum and minimum values of the trend display

data. Manual scaling is also available in which the upper and lower limits can be set

arbitrarily as necessary.

• Split Display Display and Assignments «For procedures, see section 7.6.»

Up to 16 lines (T1 through T16) of trends can be displayed. You can select the

measurement function of any element to be assigned to T1 through T16. During

harmonic measurement, you can also specify the harmonic.

The screen is divided up to 4 windows and the trends that are turned ON are

assigned to the divided windows in order from T1 through T16.

• Display Interpolation, Graticule, and Label Display «For procedures, see

sections 6.6 and 6.7.»

The settings specified for waveform display are used.

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 57 / 384

Search results

Summary of Contents for wt3000

Reviews: