YOKOGAWA wt3000 User Manual Download Page 282

Page: 282 / 384

9-35

IM 760301-01E

App

Index

Saving and Loading Data

• Selecting the Copy Destination

12.

Press the

Dest Dir

soft key. The copy execution menu and the copy destination

File List dialog box appear.

• Selecting the Copy Destination Storage Medium or Directory

13.

The procedure is the same as that given inin “Selecting the Storage Medium”

and “Selecting the Save Destination Directory” in section 9.3.

• Executing the Copy Operation

14.

Press the

Copy Exec

soft key. All the copy source files with asterisk marks are

copied.

9.8 Copying Files

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 282 / 384

Search results

Summary of Contents for wt3000

Reviews: