9-29
IM 760301-01E
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
Saving and Loading Data
Explanation
• Selecting the Storage Medium and Directory
The explanation is the same as that given in “Selecting the Storage Medium and
Directory” in section 9.3.
• Specifying the File to Be Displayed in the File List Dialog Box
You can specify the file to be displayed in the File List dialog box.
• Item
The list of files corresponding to the file type (Setup, Wave, or Numeric) that is
specified for File Item in the File menu, in the selected directory, is displayed.
• All
The list of all the files in the selected directory is displayed.
• Properties
Displays the following information about the selected file: filename.extension, the file
size, the date the file was saved, the attribute, the comment, etc.
• Selecting the File Attribute
Select the file attribute of each file from the following.
• R/W
Read and write.
• R
Read only. Cannot write to the file or delete the file.
Note
•
You cannot change a directory attribute.
•
The number of directories and files that can be displayed in the file list is 2500. If the number
of directories and files in a directory exceeds 2500, the file list randomly displays 2500 of the
directories and files.
•
Files that do not have an archive attribute are not displayed in the File List window. Do not
remove the archive attribute of the files saved by the WT3000 using your PC.
•
Up to 41 characters can be displayed in the path. If the path exceeds 41 characters, “...” is
displayed at the end of the character string.
•
File names are not case-sensitive. Comments are case-sensitive. In addition, the following
names cannot be used due to limitations of MS-DOS.
AUX, CON, PRN, NUL, CLOCK, COM1 to COM9, and LPT1 to LPT9
9.6 Specifying the File to Be Displayed, Displaying File Properties, and Selecting File Attributes