manualshive.com logo in svg

YOKOGAWA wt3000, User Manual, Page: 251 / 384

Share
Download
YOKOGAWA wt3000 User Manual Download Page 251

9-4

IM 760301-01E

• Selecting the Storage Medium to Be Formatted

4.

Press the 

Format

 soft key. A storage media list is displayed in the File List

dialog box.

5.

Press the 

cursor keys

 to select the storage medium to be formatted.

Net Work (drive) cannot be formatted.

• Viewing the Storage Media Information

6.

Press the 

Media Info

 soft key. The information about the storage medium that

was selected in step 5 is displayed.

• Selecting the Number of Partitions

7.

Press the 

Format

 soft key to display the Format menu.

8.

Press the 

cursor keys

 to select 1 or 2.

A storage medium that is already partitioned can be selected and formatted as a

separate storage media, but the separate storage media cannot be partitioned further.

• Executing (OK)/Aborting (Cancel) the Format Operation

9.

Press the 

Format Exec

 soft key. An Alert dialog box appears.

10.

Press the 

cursor keys

 to select OK or Cancel.

11.

Select OK and press 

SET

 to execute the format operation.

Select Cancel and press 

SET

 to not carry out the format operation.

9.2  Formatting the Storage Media

Summary of Contents for wt3000

































































































































































































































































































































































































Reviews:

No comments