manualshive.com logo in svg

YOKOGAWA WT210, User Manual, Page: 74 / 316

Share
Download
YOKOGAWA WT210 User Manual Download Page 74

4-6

IM 760401-01E

Explanation

The following two types of input filters are provided.  The filters eliminates noise such as

inverter waveforms and distorted waveforms and allow stable measured values to be

obtained.

Line Filter

This filter is inserted only into the measurement circuit.  It eliminates noise

components of the input signal.  The cutoff frequency is 500 Hz.

• on: Selecting on and pressing the ENTER key enables the line filter function and

turns ON the LINE indicator.

• oFF: Selecting oFF and pressing the ENTER key disables the line filter function.

The LINE indicator turns OFF.

Frequency Filter

This filter is inserted only into the frequency measurement circuit.  The cutoff

frequency is 500 Hz.  Since the WT210/230 is making measurements in sync with the

input signal, the frequency of the input signal must be measured correctly.

• on: Selecting on and pressing the ENTER key enables the frequency filter function

and turns ON the FREQ indicator.

• oFF: Selecting oFF and pressing the ENTER key disables the frequency filter

function.  The FREQ indicator turns OFF.

Note

You cannot change the input filter ON/OFF setting when integration is started.  You must stop

and reset integration to do so.

4.3  Turning ON/OFF the Input Filter

Summary of Contents for WT210





























































































































































































































































































































Reviews:

No comments