YOKOGAWA WT210, User Manual, Page: 114 / 316

6-4
IM 760401-01E
6.2 Setting Integration Mode and Integration Timer
Keys
CHECK RANGE MODE
UPDATE
SCALING AVG LINE FREQ STORE RECALL HARMONICS KEY LOCK
FILTER
A
B
C
VOLTAGE VOLTAGE
VOLTAGE
AUTO
MODE
CURRENT
AUTO
RANGE
MAX HOLD TRIG
CAL
INTEGRATOR
INTEG SET
SHIFT KEY LOCK
1P 3W 3P 3W
3P 4W 3V 3A
OUTPUT
HARMONICS MEMORY
REMOTE
MEAN
CURRENT RMS DC
FUNCTION ELEMENT
MAX HOLD
HOLD
ENTER
RESET
WIRING
START STOP
LOCAL SETUP
1
m
V
k
A
V
TIME
ar
deg
h
h
VA
M W
m
V PF
k A
M W
m
V Hz
k A
M W
2 3
FUNCTION ELEMENT
1 2 3
FUNCTION ELEMENT
1 2 3
%
The explanation given in this section uses WT230 as an example. For the differences between
the WT210 and the WT230, see section 2.2, “Operation Keys and Functions/Element Display.”
Procedure
• Operate the instrument by following the thick lines in the menu below.
• Press the ENTER key to confirm a selection or setting.
• To leave the current menu in the middle of the operation, press the key indicated in
step 1. The confirmed settings up to that point are kept.
Selecting the Integration Mode
1.
SHIFT
RESET
INTEG SET
ENTER
3.
( Display C )
ENTER
5.
Select the mode
2. 4.
End of setting
( Display C )
(See sectoin 9.3)
Selecting the Integration Timer
1.
SHIFT
RESET
INTEG SET
ENTER
3.
( Display C )
Hour
( Display A )
2.
ENTER
6.
4.
sets the value
5.
moves digits
SHIFT
Minute
( Display B )
ENTER
9.
7.
8.
Same as steps
4 and 5 above.
(See sectoin 9.3)
Second
( Display C )
ENTER
12.
End of setting
10.
11.
Same as steps
4 and 5 above.