manualshive.com logo in svg

YOKOGAWA WT1801E, User Manual, Page: 78 / 154

Share
Download
YOKOGAWA WT1801E User Manual Download Page 78

12-1

IM WT18O1E-02EN

Chapter 12  Vector Display (Option)

12.1  Setting the Display Format

This section explains the following settings for the vector display format. This feature is available on 
models with the /G5 or /G6 option.
•  Number of divisions of the vector screen
•  Turning the numeric data display on and off

►

 “Display Format (FORM)

—Vector

” in the features guide

Others Menu

Press 

OTHERS

 to display the following menu.

  

Select Vector. 

Even if you select one of these settings, you can still show the vector display. You can split 

the screen into top and bottom halves, and show the vector display in one half and another 

display in the other half. ► chapter 13 

Vector Form Menu

Press 

FORM

 to display the following menu.

If the setup parameter list is being displayed (the INPUT INFO key is illuminated), the Info Form menu may 
be displayed. If this happens, press 

FORM

 again.

  

Set the number of divisions on the vector screen (Single, Dual). 

Turns the numeric data display on and off 

Summary of Contents for WT1801E



























































































































































Reviews:

No comments