manualshive.com logo in svg

YOKOGAWA WT1801E, User Manual, Page: 73 / 154

Share
Download
YOKOGAWA WT1801E User Manual Download Page 73

10-1

IM WT18O1E-02EN

Chapter 10  Trend Display

10.1  Setting the Display Format

This section explains the following settings for the trend display format:
•  Number of divisions of the trend screen
•  Time axis
•  Restarting trends
•  Advanced trend display settings

►

 “Display Format (FORM)

—Trend

” in the features guide

Others Menu

Press 

OTHERS

 to display the following menu.

  

Select Trend.

Even if you select one of these settings, you can still show the trend display. You can split the 

screen into top and bottom halves, and show the trend display in one half and another 

display in the other half. ► chapter 13 

Trend Form Menu

Press 

FORM

 to display the following menu.

If the setup parameter list is being displayed (the INPUT INFO key is illuminated), the Info Form menu may 
be displayed. If this happens, press 

FORM

 again.

  

Set the number of divisions on the trend screen (Single, Dual, Triad, Quad). 

Set the time axis (3s, 6s, 10s, 30s, 1min, 3min, 6min, 10min, 30min, 1hour, 

3hour, 6hour, 12hour, 1day). 

Restarts the trend

Configure the advanced trend display settings.

Summary of Contents for WT1801E



























































































































































Reviews:

No comments