20-9
IM WT18O1E-02EN
20.6 Using SNTP to Set the Date and Time
This section explains how to use SNTP to set the date and time of this instrument.
• SNTP server
• Timeout
• Turning automatic adjustment on and off
• Time difference from Greenwich Mean Time (setting shared with the date and time on the System
Config menu)
• Time adjustment
►
“SNTP (SNTP)” in the features guide
Configuring SNTP Settings (SNTP)
Press
UTILITY
, the
Network
soft key, and then the
SNTP
soft key to display the following menu.
Configure the SNTP server settings
(IP address; host name and domain name can be set
when DNS is enabled).
Set the timeout value (1 to 60 s).
Turns automatic adjustment on and off
Set the time difference from Greenwich Mean Time
(–12 hours and 0 minutes to 13 hours and 0 minutes).
Executes time adjustment