manualshive.com logo in svg

YOKOGAWA WT1801E, User Manual, Page: 104 / 154

Share
Download
YOKOGAWA WT1801E User Manual Download Page 104

17-3

IM WT18O1E-02EN

17.2  Saving Setup Parameters

This section explains the following settings for saving setup parameters:
•  Save destination
•  Auto naming
•  File name
• Comment

►

 “Saving Setup Data (Save Setup)” in the features guide

Save Setup Menu

Press 

FILE

 and then the 

Save Setup

 soft key to display the following menu.

  

Set the save destination. 

Set the auto naming method (OFF, Numbering, Date). 

Set a comment. 

Set the file name.

You can set the file name that is used when Auto Naming is set to OFF. This is also used as 

the common file name when Auto Naming is set to Numbering.

Saves the data

Setting the Save Destination (File List)

Press the 

File List

 soft key to display the following screen.

  

Operation menu 

The destination storage medium 

(drive) or folder

Use the 

cursor

 keys (▲▼) to move the 

cursor, and press 

SET

 to select the 

destination.

File list

Note

For details on how to move between the operation menu and the file list and how to operate 
the operation menu, see section 17.6.

Summary of Contents for WT1801E



























































































































































Reviews:

No comments