manualshive.com logo in svg

YOKOGAWA WT1800E, User Manual, Page: 53 / 154

Share
Download
YOKOGAWA WT1800E User Manual Download Page 53

6-12

IM WT18O1E-02EN

6.7  Setting the Custom Display

This section explains the following Custom display settings:
•  Loading of display configuration files
•  Loading of background files
•  Display configuration
  Total items, items per page, custom items (item number, measurement function, element and wiring 

unit, harmonic order, display position, font size, font color), saving custom display configuration files

•  Turning the display frame on and off

►

 “Custom Display (Custom)” in the features guide

1.

  Follow the procedure in section 6.1 to set the numeric data display format to Custom.

Custom Items Menu

2.

 Press 

ITEM

 to display the following menu.

If the setup parameter list is being displayed (the INPUT INFO key is illuminated), the Info Items menu may 
be displayed. If this happens, press 

ITEM

 again.

  

Loads a display configuration file 

Turns the display frame on and off 

Loads a background file 

Loads display configuration and 

background files at the same time 

► page 6-14 

Configure the display configuration. 

You can load files for the custom display. 

Display configuration files:  .txt files 

Background files: 

.bmp files 

•  You can use the “Edit Items” menu described 

below to change the display configuration that 

you have loaded. 

•  To load both a display configuration file and 

background file at the same time, load the 

display configuration file. 

Summary of Contents for WT1800E



























































































































































Reviews:

No comments