YOKOGAWA WT1800 User Manual Download Page 70

Page: 70 / 167

8-6

IM WT1801-01EN

User-Defined Events (User Defined Event)

User-defined events can be used to trigger data storage and automatic printing (option). You can define up to
eight user-defined events.

User-Defined Event Number (Event No.)

Select a user-defined event number from 1 to 8.

Turning User-Defined Events On and Off

Select whether to enable user-defined events.

User-Defined Event Name (Event Name)

• Number of characters: Up to eight
• Usable characters: Spaces and all characters that are displayed on the keyboard

Indication of User-Defined Event Occurrence (TRUE/FALSE)

Set the character strings to show when a user-defined event occurs and when it does not occur.
• Number of characters: Up to six
• Usable characters:

Spaces and all characters that are displayed on the keyboard

Judgment Condition Specification Method (Expression)

Select the method for specifying judgment conditions from the following options.
• Range (Range): Specify judgment conditions using ranges of measurement function values or differences

from a reference value.

• Condition (Condition):

Specify judgment conditions using user-defined events.

Range (Range)

Specify the judgment condition here when you have set the judgment condition specification method to Range.

• Function (Function)

You can select any of the measurement function types listed under “Items That This Instrument Can

Measure.”

Click here.

• Element (Element/Σ)

You can select the element/wiring unit from the options below. The available options vary depending on the

installed elements.

Element1, Element2, Element3, Element4, Element5, Element6, ΣA, ΣB, and ΣC

• Order (Order; option)

This is the same as setting the harmonic order in the 4-, 8-, and 16-value displays.

Click here.

• Judgment Condition

Select the method for comparing the measured value and the reference value from the following options.
OFF, <, <=, =, >, >=, != (not equal)

• Reference Value

Select a number from –9.9999 T to 9.9999 T.

8 Computation

Summary of Contents for WT1800








































































































































































Search results

Summary of Contents for WT1800

Reviews:

Related manuals for WT1800

Brands by name

Popular brands

YOKOGAWA WT1800, User Manual

Search results

Summary of Contents for WT1800

Reviews:

Related manuals for WT1800

Brands by name

Popular brands