5-82
IM 760151-17E
5.18 WAVeform Group
The commands in this group deal with the output of the retrieved waveform display data.
There are no front panel keys that correspond to the commands in this group.
:WAV eform
:
;
TRACe
<Space>
U
<x>
I
<x>
?
FORMat
<Space>
ASCii
FLOat
?
BYTeorder
<Space>
LSBFirst
MSBFirst
?
STARt
<Space>
<NRf>
?
END
<Space>
<NRf>
?
SEND
?
LENGth
?
TRIGg er
?
SRATe
?
?
:WAVeform?
Function
Queries all information about the waveform
display data.
Syntax
:WAVeform?
Example
:WAVEFORM? -> :WAVEFORM:TRACE U1;
FORMAT ASCII;START 0;END 1001
:WAVeform:BYTeorder
Function
Sets the output byte order of the waveform
display data (FLOAT format) that is transmitted
by “
:WAVeform:SEND?
” or queries the current
setting.
Syntax
:WAVeform:BYTeorder {LSBFirst|
MSBFirst}
:WAVeform:BYTeorder?
Example
:WAVEFORM:BYTEORDER LSBFIRST
:WAVEFORM:BYTEORDER? -> :WAVEFORM:
BYTEORDER LSBFIRST
Description This value is valid when “
:WAVeform:FORMat
”
is set to “
{FLOat}
.”
:WAVeform:END
Function
Sets the output end point of the waveform
display data that is transmitted by
“
:WAVeform:SEND?
” or queries the current
setting.
Syntax
:WAVeform:END {<NRf>}
:WAVeform:END?
<NRf>
to 0 to (total number of data points - 1)
Example
:WAVEFORM:END 1001
:WAVEFORM:END? -> :WAVEFORM:
END 1001
Description The “
:WAVeform:LENGth?
” command can be
used to query the (total number of data points).