YOKOGAWA VZ20X, User Manual

Page: 56 / 158

5-15
IM 77V01B01-01EN 5th Edition: 2023.03.07-00
5.6.2 Editing Settings from the Save and apply Screen
When the connection with VZ20X has been set, edit the parameter settings by following
the procedure below.
Procedure
1
In the operation list in the home screen, click Save and apply settings, and the
[Select file] button. The "Open" window opens. Select the file to apply to the
VZ20X.
2
The file opens and the following screen is displayed.
3
The mode changes to the Edit mode, and the setting values of each parameter
can be changed. After checking and editing parameter setting values, click the
[Apply] button. To not apply setting values, click the [Cancel] button. The screen
returns to the save and apply settings screen.
4
The parameter setting values are written to the VZ20X at the connection
destination. After parameter setting values are written, all parameters are read
from the VZ20X at the connection destination. If there is a difference between the
parameters that were written back and the parameters that were read, the
parameter name and setting value are displayed underlined in red, and and a
message is displayed.