YOKOGAWA VZ20X, User Manual

Page: 53 / 158

5-12
IM 77V01B01-01EN 5th Edition: 2023.03.07-00
5.6 Editing and Applying Settings
In the Edit mode, parameter setting values can be changed. After settings are changed,
the new settings can be written back to the VZ20X.
If there is a difference between the parameters that were written back and the
parameters that were read, the parameter name and setting value are displayed
underlined in red, and a message is displayed.
Note
Communication may be disconnected after setting the parameters.
In an Ethernet connection: Communication is disconnected when parameter setting
values are changed.
In an USB connection: Communication is disconnected when communication related
parameters and time synchronization parameter setting values are changed.
5.6.1 Editing from the Settings Screen
When the connection with VZ20X has been set, edit the parameter settings by following
the procedure below.
Procedure
1
In the operation list in the home screen, click the respective setting item
(communication, time synchronization, analog input) in Settings. The following
screen is displayed. Click the [Edit mode] button