YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 90 / 98

7-1
<Toc> <Ind> <7. File Format>
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
7. File Format
7.1 Configuration file
(1) EJXMVTool DTM file
Table 7.1 Configuration File Information
T0701E.EPS
Category File Name
Flow Configu-
ration Wizard
Import menu
Flow Configu-
ration Wizard
Export menu
Description Location
Flow
Parameter File XXXXXX.xmv
䊊 䊊
* User Flow parameters
* Transmitter Flow
parameters
EJXMVToolDTM driven on
the different frame
application can access the
file.
Compatible between both
protocol DTM, HART and
FF.
<WinInstDrive>:
\Desk Top
\My Documents
(Default)
HART
General
parameters
file XXXXXX.prm
䊊
– * HART Transmitter
General parameters.
(only for FSA210 user)
<WinInstDrive>\D
esk Top
\My Documents
(Default)
<WinInstDrive>: Windows installed drive
(2) Frame Application project file (.dfs file for FieldMate)
In the project file, project information specific to each frame application is saved in
addition to the EJX910DTM and EJXMVTool parameters shown in below. Only that
frame application can use the file.
User Flow parameters
Transmitter Flow parameters
Transmitter General parameters