YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 85 / 98

6-34
<Toc> <Ind> <6. Display Specification >
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
Flow Configuration Mode
• Auto Compensation Mode (Default)
Configuration of the fluid physical properties and primary element for the EJX910A can
be performed using a dialog window.
• Basic Mode
Flow operation and density compensation are performed conventionally, with the flow
factors being input manually.
NOTE
1. The flow unit is not automatically converted in basic mode.
2. The flow range is set to LRV=0 and URV=100 when the Flow Configuration Mode is
changed to Basic Mode or Auto Compensation Mode.
6.4.2 Basic Mode Setup
Select a Fluid Type from “Gas” or “Liquid”.
(1) Gas (Default)
F0638E.EPS
Figure 6.37 Basic Mode Setup Screen
• Input Reference Temperature (Tb), Reference Static Pressure (SPb), and Kfactor.
NOTE
The static pressure value is according to the transmitter’s abs and gauge selection (A/G
select). But same unit character is used for both absolute and gauge.