YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 82 / 98

6-31
<Toc> <Ind> <6. Display Specification >
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
NOTE
• Please confirm the density value on the following page (fluid physical property setup
page) and continue configuration.
• If the temperature range input on the Fluid Operating Range Setup is too wide, there is a
probability of the calculation error of density is big.
• This range are used only for the density and viscosity calculation.
• Range of Transmitter are not changed.
6.3.6 Fluid Physical Property Setup
(1) Gas or Steam
(Natural gas ISO physical properties setup)
F0633E.EPS
Figure 6.32 Fluid Physical Property Setup Screen(1)
Confirm the value of density, viscosity, molecular weight and isentropic.
Units can selectable from following.
Density: kg/m3 (Default), lb/ft3
Viscosity: Pa Sec, lb/ft sec
NOTE
The density and viscocity value can be customized.
The Isentropic exponent value can be customized.
The molecular weight value can be customized.
The value is shown after entering return key.