YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 63 / 98

6-12
<Toc> <Ind> <6. Display Specification >
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
6.2 Flow Parameters Management
Flow Parameters Management consists of Flow Configuration Wizard and Obtain Flow
Coefficient. This manual describes about the file management in the Flow Configuration
Wizard in the sections 6.3 and 6.4, and Obtain Flow Coefficient in the section 6.5.
Flow Parameters Management can be done from the Flow Configuration Wizard by the
following procedures
Click the [Device] --> [Additional Functions] --> [Flow Configuration Wizard]
F0613E.EPS
Figure 6.12 Top Menu Screen of Flow Configuration Wizard
WARNING
The use of inappropriate materials can result in the leakage of corrosive process fluids and
cause injury to personnel and/or damage to plant facilities. Check wetted parts materials
and transmitter fill fluid for compatibility with the intended process fluid.
6.2.1 Initialize
Initialize flow configuration parameters.
NOTE
Initialize can be used only in the Flow Configuration Mode screen.