YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 26 / 98

4-3
<Toc> <Ind> <4. Preparation>
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
4.2 Installation Procedure
4.2.1 EJXMVTool online manual
The pdf format Manual for EJXMVTool is located at <Yokogawa MVTool Additional resource
disk>: \EJXMVTool_Manual.pdf.
If Adobe Reader is not on your PC, install it.
This may be done by double clicking on < FieldMate CDROM>:
\READER\ENGLISH\AdbeRdr80_en_US.exe in Windows Explorer.
(<CDROM> is the CD-ROM drive of your computer.)
4.2.2 Uninstall FSA210
This procedures are only applicable for the users of FSA210 Mass Flow Configuration
Software.
If FSA210 is existing on your PC, uninstall it to avoid the competition with FieldMate.
To uninstall all the program of FSA210, take the following three steps.
(1) Uninstall a field communication server
Execute <FieldInstDrive>: \PRM\Program\PRMUninstall.exe
Double-click the filename in Windows Explorer.
<FieldInstDrive> is the drive on which field communication server is installed.
<FieldInstDrive> is the drive where the PRM directory is located.
The default drive is the same drive on which Windows is installed.
(2) Uninstall the EJXMVTool program with the Add or Remove Programs function of the
Windows Control Panel. Select EJXMVTool and click [Change/Remove].
(3) Uninstall Exaopc
Use the Add or Remove Programs function of the Windows Control Panel to uninstall
Exaopc. Select Exaopc and click [Change/Remove].
Follow the instruction to reboot the computer.
NOTE
Refer to Appendix A for the detailed procedures of uninstalling FSA210.
4.2.3 For FieldMate Users
If you already have FieldMate installed in your computer, which satisfies the operating
requirement of FSA120, you may need to skip the installation of FieldMate. Please see the
followings.
NOTE
If FieldMate installed in your PC is older version and does not satisfy the working condition
of FSA120, it is necessary to install FieldMate which satisfies the requirement.