YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 20 / 98

3-7
<Toc> <Ind> <3. Function Specification>
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
3.5.4 Primary Devices Supported in Auto Compensation Mode
This function is supported by EJXMVTool DTM.
Table 3.3 Supported primary devices
T0302E.EPS
Fixed Mode (Sets the discharge coefficient and gas expansion factor to a fixed value)
Primary Device
Orifice Flange Taps [ASME MFC-3M 1989]
Orifice Flange Taps [AGA No.3 1992]
Orifice Flange Taps [ISO5167-2 2003]
Orifice D and D/2 Taps [ISO5167-2 2003]
Orifice D and D/2 Taps [ASME MFC-3M 1989]
Orifice D and D/2 Taps [ISO5167-1 1991]
Orifice Corner Taps [ISO5167-2 2003]
Orifice Flange Taps [ISO5167-1 1991]
Orifice Corner Taps [ISO5167-1 1991]
Orifice Corner Taps [ASME MFC-3M 1989]
ASME FLOW NOZZLES [ASME MFC-3M 1989]
Classical Venturi tube with a machined convergent section [ISO5167-1 1991/ ISO5167-4 2003]
ISA1932 nozzle [ISO5167-1 1991/ ISO5167-3 2003]
ASME Venturi Tubes With a machined convergent section [ASME MFC-3M 1989]
Classical Venturi tube with a rough-welded sheet-iron convergent section
[ISO5167-1 1991/ ISO5167-4 2003]
ASME Venturi Tubes With a rough Cast or Fabricated Convergent [ASME MFC-3M 1989]
Long radius nozzle [ISO5167-1 1991/ ISO5167-3 2003]
Classical Venturi tube “as cast” convergent section [ISO5167-1 1991/ ISO5167-4 2003]
Venturi nozzle [ISO5167-1 1991/ ISO5167-3 2003]
Orifice
Type
FIX
Nozzle
Venturi