manualshive.com logo in svg

YOKOGAWA vigilantplant 437101, Operation Manual, Page: 52 / 59

Share
Download
YOKOGAWA vigilantplant 437101 Operation Manual Download Page 52

52

IM 04P02B01-02E

Releasing the Alarm Output (Alarm ACK Operation)

This operation releases the alarm indication or relay output (/A1, /A2,  /A3, /A4, or /A5
option) when the alarm indication or output relay is set to hold operation. For details on
the hold operation, see section 1.3, “Alarms” in the 

µ

R20000 Recorder User’s Manual

(IM 04P02B01-01E) on the CD-ROM.

1.

Press the 

FUNC

 key.

2.

Press the 

 key with 

Alarm ACK

 shown on the screen.

The alarm indication or relay output is released. The screen returns to the data
display screen.

Func=Alarm ACK

Description

Alarm ACK Operation and the Actions of the Alarm Output Relay/Alarm Display

Alarm

Alarm output
relay

Alarm ACK

Alarm ACK

Alarm ACK

or

or

Alarm indication

or

ON

Blinking

OFF

Blinking

OFF

Activating/Releasing the Key Lock

When the recorder is configured to use the key lock function, this operation activates or
releases the key lock. For details on setting the key lock function, see section 7.10,
“Setting the Key Lock Function” in the 

µ

R20000 Recorder User’s Manual 

(IM 04P02B01-

01E) on the CD-ROM.

Activating the Key Lock

1.

Press the 

FUNC

 key.

2.

Press the 

 key to select 

Keylock

 and then press the 

 key.

The key lock is activated. The screen returns to the data display screen.

Releasing the Key Lock

Note

A password is required to release the key lock.

1.

Press the 

FUNC

 key.

2.

Press the 

 key to select 

Keylock

 and then press the 

 key.

3.

Enter the password for releasing the key lock. The password values are shown
with asterisks.
Press the 

 key to select the desired digit.

Press the 

 key to select the value.

Password=

4.

Press the 

 key.

The key lock is released. The screen returns to the data display screen.

*  When the          key or         key is pressed while holding down the SHIFT key, the operation is 
  reversed as when the respective key is pressed by itself.

Recording/Displaying Data

Summary of Contents for vigilantplant 437101




























































Reviews:

No comments