manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 96 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 96

87

87

IM 54011-E

Measuring

T

emperatures

■

To transmit measured values to a PC in real-time

Once real-time transmission is switched on when your TM20 has been connected to a per-
sonal computer, pressing the [MEMORY] key immediately starts uploading the measured
data to the computer in real-time.  To receive these values, run an appropriate application at a
computer, such as Hyper Terminal in Accessories of Windows 98.
To switch on real-time transmission in your TM20, follow the procedure below.

1.

When the Home screen is displayed, press the [FUNC], [5], and [4] keys in order.

2.

Press the [SET] key.

3.

Using the [

▼

] or [

▲

] key, select ON.

4.

Press the [SET] key.

A down-arrow (

↓

) appears in the lower left of the screen.  In this state, starting measurements and pressing the

[MEMORY] key to start recording transmits the measured values to the personal computer in real-time.

 Caution

Since the PC interface is not isolated, be sure to use non-grounded probes when trans-
mitting measured values to a PC in real-time.

7 Other Useful Functions

Summary of Contents for TM20
















































































































Reviews:

No comments