82
82
IM 54011-E
■
To quickly search for a tag or log
The main unit has a function to search for a tag or log using a number as the key.
This function is useful if there are many logs and tags set in the main unit and is faster than
using the [
▼
] key.
1.
Bring up the Home screen.
2.
Press the [
▼
] key.
3.
Press the [POWER] key.
4.
Enter a two-digit number.
[TIP]
A two-digit number entered is displayed in the “No.” field of Thermo-Collector screen. It is recom-
mended to make a note of which tag or log corresponds to which number.
5.
Press the [SET] key.
The tag (or log) that corresponds to the entered number is displayed on the screen.
-End of procedure-
■
To record measured data if the tag or log has not been set
In addition to the function for creating a tag or log from the Function menu, the main unit has
a useful way to create them during measurement.
This is very useful when, for example, the temperature of a steel plate needs to be measured,
but a tag for that steel plate has not been set beforehand.
1.
Bring up the Home screen.
2.
Press the [
▼
] key repeatedly until [NewTag] or [NewLog] appears on the screen.
[NewTag] or [NewLog] appears on the screen.
3.
Press the [MEMORY] key.
The temperature is measured.
[TIP]
Tags (or logs) is temporally assigned a specific name using sequential numbers (Examples: Tag01,
Tag02, Log01, Log02....). In this case, the measurement interval for the log is automatically set to 10
seconds, and the measurement period of the log is set to 2 days. However, these temporary tag names
and log names can be modified later as required.
See Also
For how to modify tag or log names, refer to Chapter 5, “Confirm, Modify, Clear, or Delete the Data
with the Main Unit” in the “Preparing for Measurement” part.
-End of procedure-
7 Other Useful Functions