manualshive.com logo in svg

YOKOGAWA TB820D, User Manual, Page: 75 / 87

Share
Download
YOKOGAWA TB820D User Manual Download Page 75

<8.  MAINTENANCE>

8-14

IM 12B01B30-02EN 2nd Edition : June 09 , 2021-00

CAUTION

After turning on the power of the instrument, warm it up for at least 30 minutes before starting the 

measurement.

The following items are also available as spare parts. Replace them if necessary.

Table 8.7 

Top cover, clear cover

Part No.

Name

Description

K8003EZ

CLEAR COVER ASSY

Transparent window at the top of the Flow cell

K8003MZ

COVER

Top cover (rubber cover)

G9330DC CAP

Piping cap

8.9 

Flow cell replacement

You can replace Flow cell of TB820D. Arrange a replacement for Flow cell according to Table 8.8. 

Figure 8.18 shows an example of Flow cell for replacement.

A window glass is attached to the replacement Flow cell in advance. If  the suffix code -U1 is 

selected, the oscillator is attached to the Flow cell window.
Refer to Section 8.8 for how to replace Flow cell.

with oscillator cable (-U1)

without oscillator cable (-NN)

Figure 8.18 

Example of replacement Flow cell

Table 8.8 

Flow cell

Part No.

Name

Description

K8003ED

CELL ASSY

For TB820D

-□□-□□-NN

K8003EM CELL ASSY

For TB820D

-□□-□□-U1

Summary of Contents for TB820D
























































































Reviews:

No comments