4-3
IM 704510-01E
Common Operations
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
4.3
Basic Operation of Keys and Rotary Knob
Setting keys
Pressing the setting key such as the MODE key or FUNCTION key shows a soft key
menu at the bottom section of the screen.
Description of the Icons on the Soft Key Menu.
: Press the soft key to open a pop-up menu or pop-up window.
: The value can be set using both the numeric keys and the rotary knob. For the
procedure of setting values, see the next page.
: The value can be selected using the rotary knob.
Set using the numeric keys and rotary knob
Display the pop-up menu
Pop-up menu
Set using the rotary knob
Setting Parameters Using the Rotary Knob and SELECT Key
RE
SET
SELSC
T
sec/V/
MHz
ENTER
0
1
2
3
m
4
5
6
7
8
9
n
Rotary knob
Numeric keys
In a pop-up window as shown in the following figure, select the entry box using the rotary
knob (when selected, the entry box/item name changes to a dark blue color) and set the
value according to the following procedure.
• When selecting the value
Select the value (Window or Marker)
using the SELECT key
• When setting the value
Press the SELECT key to display
the value entry area and enter
the value using the numeric keys
• When selecting ON/OFF using the option button
ON
OFF
Select ON or OFF using
the SELECT key
Using the RESET Key
This key is used to clear the entire value that is being entered (or that has already been
entered). It is useful when you wish to clear a file name or comment entirely and start
over.
Using the ESC Key
This key clears the soft key menu. If a pop-up menu or pop-up window is displayed, it is
cleared.
